Skip to content
Broken Arrow · TPO roofing

TPO roofing in Broken Arrow.
Energy-efficient flat roof for your building.

TPO roofing has become the standard single-ply membrane for commercial flat and low-slope buildings across the country, and Broken Arrow is no exception. Broken Arrow's commercial base has expanded steadily along the BA Expressway and 71st Street corridors. The Rose District anchors downtown, while light industrial and retail strip centers line the growth corridors east toward Coweta. The shift from older built-up and modified bitumen systems to TPO over the past 15 years has been driven by installation speed, seam strength, and energy performance.

Free inspectionWritten scopeW-2 crewsLocal contractor

Q: What is TPO roofing and is it right for my Broken Arrow commercial building?

A: TPO (thermoplastic polyolefin) is a single-ply membrane roofing system used on flat and low-slope commercial buildings. It is welded at the seams with hot air rather than adhesive, which creates a stronger and more durable bond. The white or light-colored surface reflects heat and reduces cooling loads. For most Broken Arrow commercial buildings with flat or low-slope roofs, TPO is the current standard membrane choice.

TPO roofing has become the standard single-ply membrane for commercial flat and low-slope buildings across the country, and Broken Arrow is no exception. Broken Arrow's commercial base has expanded steadily along the BA Expressway and 71st Street corridors. The Rose District anchors downtown, while light industrial and retail strip centers line the growth corridors east toward Coweta. The shift from older built-up and modified bitumen systems to TPO over the past 15 years has been driven by installation speed, seam strength, and energy performance.

The key difference between a TPO installation that performs for 25 years and one that fails in 8 is seam quality. Hot-air welding creates a bond as strong as the membrane itself. Improperly welded seams are the number one source of early TPO failure, and they are invisible from the ground for years before they show up as interior leaks.

We install TPO on commercial buildings across Broken Arrow. The membrane options, insulation thickness, and seam welding specifications are detailed in writing before any work begins. Schedule a free inspection and get a written scope before any work begins.

Broken Arrow commercial context

Why TPO installation quality matters more in Broken Arrow's climate..
.

Oklahoma summers stress commercial membranes. The installation details determine how long a system lasts.

Much of Broken Arrow's commercial inventory is newer, but that does not mean maintenance-free. Builder-grade commercial roofing from the mid-2000s construction boom is hitting warranty expiration right as Oklahoma storm seasons intensify. The industrial corridors east of the Turnpike see consistent hail exposure. Oklahoma's temperature swings between summer highs and winter lows create significant expansion and contraction cycles in roofing membranes. A properly welded TPO seam handles these cycles without opening. A seam welded at the wrong temperature or speed will open within a few seasons.

Oklahoma's hail exposure is significant for commercial membranes. TPO handles hail better than EPDM because of its harder surface, but penetrations and seams at flashing details remain vulnerable. A post-hail inspection on any commercial building with TPO should include probing all seams and flashing transitions, not just looking for visible punctures.

The reflective surface of TPO reduces cooling loads measurably in Oklahoma summers. For commercial buildings in Broken Arrow with significant air conditioning expenses, the energy performance of a new TPO system over the replaced membrane is a real financial benefit across the life of the roof.

Our TPO installation process in Broken Arrow

Four steps.
Seam quality guaranteed.

Every TPO installation in Broken Arrow follows this process. Seam quality is verified before we leave the roof.

01/04

System evaluation

We assess the existing roof: deck condition, insulation integrity, drain sizing, parapet height, and penetration count. Tear-off scope determined before pricing. No surprises on decking or insulation replacement.

Free / same week
02/04

Membrane and insulation scope

Written specification includes membrane thickness (60 or 80 mil), insulation R-value, fastening method, and all accessory details. Fixed pricing before commitment.

Written spec
03/04

Installation with seam verification

Hot-air welded seams tested with probe after installation. All penetrations and flashing terminations completed to manufacturer specification. Daily progress photos.

Seam-tested
04/04

Warranty registration

Manufacturer warranty registered to your building. Labor warranty written and separate. Maintenance inspection at 12 months included.

20–30 yr warranty
What to expect

Timeline, cost, and the energy savings math..
.

A TPO installation in Broken Arrow typically moves from inspection to completed membrane in two to four weeks. Material lead times for commercial TPO runs one to two weeks. Installation on a standard commercial building of 10,000 to 30,000 square feet takes three to seven business days.

Cost ranges from $5 to $10 per square foot installed, depending on tear-off scope, insulation upgrade, and roof complexity. 60-mil TPO with a straight tear-off and no insulation replacement is at the lower end. 80-mil TPO with full insulation replacement and complex flashing details runs higher.

Manufacturer warranties on TPO systems run 20 to 30 years depending on membrane thickness and the manufacturer's inspection requirements. Our labor warranty is written separately and registered to the building. Both transfer to future owners. Ask about our maintenance program for ongoing protection.

TPO installed right lasts 25 years.
Installed wrong, it fails in five.

(918) 978-2660Talk to a Broken Arrow TPO specialistSchedule free inspection
Service area within Broken Arrow

ZIP codes we serve:

740117401274014
Rose DistrictCoverage
Lynn LaneCoverage
Aspen CreekCoverage
New TulsaCoverage
101st Street CorridorCoverage
Stone CanyonCoverage
Creek Turnpike CorridorCoverage
Elm PlaceCoverage
Garnett RoadCoverage
Kenosha AvenueCoverage
Why AE Roofing in Broken Arrow

Installation quality vs.
installation speed.

TPO installation in Broken Arrow gets rushed when contractors price on volume and recover margin by moving crews fast. Seam welding quality is the first thing that suffers when a crew is behind schedule. A seam welded too fast or at incorrect temperature fails within two to five years.

We test seams with a probe tool after welding. Every seam. It adds time and it is not optional on our jobs. It is the difference between a 25-year roof and an 8-year roof.

Our project managers are in Broken Arrow through the full project. They verify seam quality, inspect flashing terminations, and sign off before the crew leaves the roof. The warranty we issue is backed by the work we actually did. Learn more about how we work.

Broken Arrow TPO roofing FAQ

Questions about TPO roofing in Broken Arrow..
.

Not on the list? Call us. A human answers.

Ask us directly
A properly installed 60-mil TPO system typically lasts 20 to 25 years in Oklahoma's climate. The primary factors affecting longevity are installation quality (particularly seam welding), the number of rooftop penetrations, and how quickly ponding water issues are addressed. Thicker 80-mil systems last longer and carry better manufacturer warranties.
TPO is a thermoplastic membrane welded at the seams with hot air. EPDM is a rubber membrane bonded with adhesive or mechanically fastened. TPO has a reflective white surface that reduces cooling loads. EPDM is typically black and absorbs heat. For most Oklahoma commercial buildings in hot-summer climates, TPO's energy performance advantage is meaningful.
TPO installation typically runs $5 to $10 per square foot on a commercial building, depending on tear-off scope, insulation upgrade, building access, and roof complexity. We price by the line item so you know what each component costs.
Sometimes, but not always. A retrofit installation requires the existing system to be in stable condition with adequate fastening. If the existing system has moisture intrusion into the insulation layer, a tear-off is required. We assess this during the free inspection.
TPO roofing in other cities
Ready when you are

The next storm
isn't waiting.

Whether your shingles are curling, your gutters are sagging, or you just want a second opinion before your insurer's deadline runs out, book the inspection. We don't charge for it, and we don't push for it.

(918) 978-2660Direct line · 7am – 9pm · 7 days

Free inspection

No cost · No pressure
We reply within 1 business hour
Free roof inspection